Sartorius 1602 MP 8 User Manual

8
Busy-Symbol (21)
signals temporary power
failure (disappears when you push tare button
(6)
or indicates that microprocessor is completing
previous function and not ready for the new job..
Place 100 g calibration weight on pan.
Waitfordisplay"100.0000g"and the beeper signal.
Balance automatically returns into weighing
program.
Sensitivity adjustment 1601 MP 8
is done
with external calibration weight only
(see accessories 100g ± 0.15mg).
Remove cap from calibration button
(4)
clear pan,
tare
(6)
, and wait for stability
(7)
. Press calibration
button
(4)
. Display shows "C" and the busy
symbol
(21)
(if display shows "CE", repeat
calibration starting from tare.)
Sensitivity adjustment 1602MP8 using the
built-in calibration weight.
Tare
(6)
. At stability
(7)
, set operating mode
switch
(3)
to "CAL". Display shows "C" and the
"Busy Symbol" (21). (lf "CE" appears, restart
adjustment with the "Stand-by" position "0"-) Wait
for display to show CC and beeper Signal before
you set operating mode switch
(3)
back to
position "l".

Sartorius 1602 MP 8 Specifications

General

Brand	Sartorius
Model	1602 MP 8
Category	Scales
Language	English