Entris
®
BCE Operating Instructions 5
About these Instructions
1.3 Target Groups
These instructions are addressed to the following target groups.
The target groups must possess the specified knowledge.
Target group Knowledge and qualifications
User The user is familiar with the operation of the
device and the associated work processes.
They understand the hazards which may arise
when working with the device and know how
to prevent them.
They have been trained in the operation of
the device.
Operator The operator of the device is responsible for
ensuring compliance with workplace health
and safety regulations.
The operator must ensure that all persons
who work with the device have access to
the relevant information and are trained in
working with the device.
1.4 Symbols Used
1.4.1 Warnings in Operating Instructions
WARNING
Denotes a danger with the risk that death or severe injury may
result if it is not avoided.
CAUTION
Denotes a hazard that may result in moderate or minor injury
if it is not avoided.
NOTICE
Denotes a danger with the risk that property damage may
result if it is not avoided.
1.4.2 Other Symbols
t
Required action: Describes actions which must be
carried out.
y Result: Describes the result of the actions carried
out.
[ ] Text inside brackets refers to control and display
items.
[ ] Text inside brackets indicates status, warning, and
error messages.
Indicates information for legal metrology for
conformity-assessed (verified) devices. Conformity-
assessed devices are also referred to as “verified” in
these instructions.
1 About these Instructions
1.1 Scope
These instructions are part of the device. These instructions
apply to the device in the following versions:
Device Model
1) 2)
Entris
®
BCE
precision balance
with frame
draft shield,
readability
10 mg | 0.1 g | 1 g
BCE622i-1x | BCE622-1x | BCE822i-1x |
BCE822-1x | BCE1202i-1x | BCE1202-1x |
BCE2201i-1x | BCE2201-1x | BCE2202i-1x |
BCE2202-1x | BCE3202i-1x | BCE3202-1x |
BCE4202i-1x | BCE4202-1x | BCE5201i-1x |
BCE5201-1x | BCE6200i-1x | BCE6200-1x |
BCE6202i-1x | BCE6202-1x | BCE8200i-1x |
BCE8200-1x | BCE8201i-1x | BCE8201-1x
1) Country-specific marking in model, x =
S Standard balances without country-specific
additions
SAR Standard balances with country-specific additions
for Argentina
SJP Standard balances with country-specific additions
for Japan
SKR Standard balances with country-specific additions
for South Korea
OBR Balances with approval for Brazil
OIN Balances with approval for India
OJP Balances with approval for Japan
ORU Balances with approval for Russia
CCN Balances with approval for China
CEU Conformity-assessed balances with EU type
examination certificate without country-specific
additions
CFR Conformity-assessed balances with EU type
examination certificate only for France
2) Model-typical marking in model
i-1x Devices with internal calibration and adjustment
function
1.2 Other Applicable Documents
In addition to these instructions, observe the following
documentation:
− Installation instructions for the accessories, e.g. printer
To Next Page
Loading...
Need help?
General