8
Keypad Input
Labeled Keys
These keys always have the function
indicated by the label, but the
functions
might not be available at all times.
Whether a function is available at a
given time depends on the operating
state of the scale and the menu
settings active at that time. Some of
the keys have a second function,
activated by pressing and holding the
key for longer than 2 seconds.
e On/off
Turn the Combics on and off or
switch it to the standby mode.
In standby mode, the display shows
OFF.
n Toggle the display between
connected weighing platforms.
With two weighing platforms
connected, this key toggles the
display between the two readouts.
( – Zero the scale
– Cancel a calibration/
adjustment procedure
) – Press briefly (< 2 sec):
Tare the weighing platform
– Press and hold (> 2 sec ):
Activate calibration/adjustment
k Toggles the display between:
– first and second weight unit, or
– gross and net values, or
– normal and 10-fold higher
resolution, depending on your
settings in the operating menu.
p – Press briefly: Print
– Press and hold: Print GMP
footer
D Press and hold: Toggle to info
mode (only when an initialized
application is active)
M– Access to Setup program
– Exit the Setup program
c – Press briefly: Quit application
program, delete input character
– Press and hold: Delete entire
input string
0, 1, 2... 9, .
Enter numbers, letters and
other characters
a Toggle between numeric and
alphabetic input
To Next Page
Loading...
Need help?
General
