23
1 7 15 Chinese taels
1 7 16 Momme
1 7 17 Austrian carats
1 7 18 Tola
1 7 19 Baht
1 7 20 Mesghal
1 8 Display accuracy*
1 8 1 o Standard resolution*
1 8 4 Single scale interval*
2 1 Program selection
2 1 1 o Weighing as the basic function
2 1 2 Toggle weight units (mass unit conversion)
2 1 3 Net-Total Formulation/Second Tare Memory
2 1 4 Counting
2 1 5 Weighing in percent
2 1 12 Averaging
Menu 3 Application Parameters
3 1 2nd Weight Unit
3 1 1 Grams (Display: o)
3 1 2 o Grams (Display: g)
3 1 3 Kilograms**
3 1 4 Carats
3 1 5 Pounds
3 1 6 Ounces
3 1 7 Troy ounces
3 1 8 Hong Kong taels
3 1 9 Singapore taels
3 1 10 Taiwanese taels
3 1 11 Grains
3 1 12 Pennyweights
3 1 13 Milligrams
3 1 14 Parts per pound
3 1 15 Chinese taels
3 1 16 Mommes
3 1 17 Austrian carats
3 1 18 Tola
3 1 19 Baht
3 1 20 Mesghal
3 2 Rang 2 Display accuracy*
3 2 1 o Standard resolution*
3 2 4 Single scale interval*
* = only for GD-, GE-models
** = only for TE models
1
) = not for models with a readability of 0.1 mg
o) = Model-dependent factory setting
To Next Page
Loading...