Sartorius GPA5202 - Net-Total Formulation

Net-total Formulation
Menu code: 2 1 6 *
Display symbol: R
Purpose
With this application program you can weigh in
different components up to a defined total.
Features
– Weigh up to 99 components from “0" to a defined
total component weight.
– Store component weights (“Store xx comp."), with
– display zeroed automatically after value is stored,
and
– automatic printout
– Clear component memory following cancellation
of the weighing sequence [by pressing (CF)] and
printout of the total weight.
– Toggling between component weight and total
weight by pressing and holding (F) (2 sec.).
– Printout of the total of the individual component
weights (T COMP)
* = Factory setting on CPA…-PCE models
36