Care and Maintenance
Service
On request, Sartorius can offer you an
individual service contract.
Repairs
Repair work must be performed by
trained service technicians. Any attempt
by untrained persons to perform repairs
may lead to hazards for the user.
Caution
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
Cleaning
§ Unplug the AC adapter from the wall
outlet (mains supply). If you have an
interface cable connected to the
balance port, unplug it from the port.
§ Clean the balance using a piece of
cloth which has been wet with a mild
detergent (soap).
§ After cleaning, wipe down the balance
with a soft, dry cloth.
!Make sure that no liquid or other
foreign objects or dust (powder) enters
the balance housing.
!Do not use any aggressive cleaning
agents (solvents or similar agents).
Cleaning Stainless Steel Surfaces
Clean all stainless steel parts regularly.
Remove the stainless steel weighing
pan and thoroughly clean it separately.
Use a damp cloth or sponge to clean
any stainless steel parts on the balance
by wiping them down. You can use
any commercially available household
cleaning agent that is suitable for use
on stainless steel. Then wipe down the
equipment to rinse thoroughly, making
sure to remove all residues. Afterwards,
allow the balance to dry. If desired, you
can apply oil to the cleaned surfaces as
additional protection.
Solvents are permitted for use only on
stainless steel parts.
66
To Next Page
Loading...