Sartorius IS 150 IGG-H - General Specifications

22
General Specifications
(for Use in Standard Applications Not Subject to Legal Metrology)
Model IS 150 IGG-H IS 300 IGG-H
Readability g 1 2
Standard deviation g <± 1 < ± 2
Linearity g < ± 4 < ± 8
Response time (average) s < 1.5 < 1.5
Fastest response time
(constant relative accuracy)
s <
1 <1
Adaptation to ambient conditions
and application requirements
By selection of 1 of 4 optimized filter levels
Data output speed
(depends on the filter level
selected)
s 0.1 - 0.1 - 0.2 - 0.4 (normal output speed)**
Dust and water protection rating IP 67, dust-tight and water-proof subject to defined conditions
(certified by TÜV*** in accordance with VDE 0470/EN60529)
Suitable for use in hazardous
areas
Zone 2 and 11
Overload capacity kg 600
Net weight (without "isi" terminal)
approx.
kg 70
Power requirements (optional) via A/C adapter, model ING2, 230 VAC or 115 VAC (to be connected
by your dealer or a Sartorius service technician only)
Frequency Hz 48 – 63
Power consumption
(with isi10,20,30 connected to
an A/C adapter, model ING2)
VA 34: maximum, 18: average
(only weighing platform
connected to an A/C adapter,
model ING2)
VA 10: average
Selectable weight units g*, kg* , ct, oz, ozt, tlh, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat,
MS, tons
Automatic zero-tracking function
(can be turned off by menu
code)
Standard feature
Built-in interface RS-485 (standard, XBPI protocol): 8-bit; odd parity;
transmission rates: 9,600...38,400; half-duplex
optional for RS-232 (SBI protocol): 7-bit; parity: even, mark, odd, space;
transmission rates: 150...19,200 baud;
1 or 2 stop bits, software /hardware handshake;
factory setting: 1,200 baud; odd parity; 1 stop bit; hardware handshake
with two characters after "CTS"
* = Weight unit can also used in legal metrology
** = Menu setting "data output speed for converter" is five times faster
*** = The TÜV is the German Association for Technical Safety and Inspection