15
Preparation
A circle in the upper right-hand corner of the display
indicates that the balance was disconnected from
power.
This symbol is shown, for example, the first time
the balance is put into operation, or after a power
outage.
● Switch on the balance: Press e.
> All symbols on the display light up briefly.
> The balance performs a display test.
$ Tare the balance, if necessary: Press w
When you turn on the balance, the b symbol is
displayed until you press a key.
If the b symbol is displayed during operation,
this indicates that the processor is performing
a function and cannot receive further commands
at the moment.
Additional Functions
● Switching off the balance: Press e
A circle in the lower left-hand corner of the display
indicates that the balance has been switched off and
is in stand-by mode.
To Next Page
Loading...
