Example: Counting parts into a container
Settings: Application program: Net-total formulation 2 1 6;
Print application parameters: On, print all 7 1 2; Automatic printout of last net value 7 3 1
Step Key (or instruction) Display/Data output
1. Place empty container +
65.0 g
on the balance.
2. Tare the balance. w
0.0 g
3. Add first component.
+ 120,5 g
4. Store component data. v
0.0 g
NET
COMP1 + 120.5 g
5. Add next component. + 70,5 g
6. Store component data. v
0.0 g
NET
COMP2 + 70.5 g
7. Weigh in further components Repeat steps
as desired. 5 and 6.
8. Continue filling to target press and hold v
+ 191,0 g
(view total). (2 sec.) G
36
To Next Page
Loading...
