12
Practical Example
Enter “Workstation 234” as Balance ID; Display and Print Other User Data
Step Key (or instruction) Display/Output
1. Select Setup menu, then Input; see Preparation
Display balance workstation ID (in
this example: no ID number exists)
2. Enter the first letter of the balance a 13th through 20th digits of ID displayed
workstation ID
3. Set the letter “W” y repeatedly, until the W
is in the middle
4. Enter the next letter of the balance a
workstation ID
5. Select the letter “o” Y repeatedly
6. Repeat steps 4 and 5 with a x X
the appropriate letters (display
“longer” values: see “Data Output
Functions” on page 57)
7. Store balance workstation ID ID soft key (X)
8. Display the 5th through 12th digits x
of the balance workstation ID
IDz(- a -)b
To Next Page
Loading...