15
Configuring the Balance
Practical Example
Select the Counting Application Program
Step Key (or instruction) Display/Output
1. Select Setup menu M
2. Select Balance Functions Menu soft key w
group code (Menu)
3. Select the Application Y
Prog. group
4. Confirm Application Program X
(2nd menu level)
5. Confirm App. Selection X
(3rd menu level shows current
setting; in this case: weighing)
6. Select the Counting program Y Y
7. Confirm selection X
of Counting program
8. Set other parameters, if desired x y Y X
9. Save settings and exit menu M
To Next Page
Loading...