Sartorius LP Models - Application Program Functions; Additional Functions and Balance Control; Practical Example: Unit Toggling

32
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring
(not during alphanumeric input),
– printing,
you can also access the following
functions from this application:
– calibration
(not during alphanumeric input),
– setup,
– turning off the balance.
Calibration/Adjustment
● Press q
> See “Calibration/Adjustment”
for further instructions
Setup (setting parameters)
● Press M
> See “Configuring the Balance”
for further instructions
Turning Off the Balance
● Press e
> The balance shuts off
> The display goes blank
Practical Example
Toggle the Display From Grams [g] (1st Unit) to Troy Ounces [ozt] (2nd Unit)
Step Key (or instruction) Display/Output
(R1: weight unit 1)
1. Toggle to Troy ounces [ozt] ozt soft key v
(R2: weight unit 2)
2. Toggle to grams [g] g soft key v