Sartorius LP Models - Practical Example: Net-Total Formulation; Weighing Multiple Components (Net-Total)

41
Operating the Balance
Practical Example
Weighing in Several Components
(Parameter settings: Net-total application program 2 1 6; print all parameters 7 1 2)
Step Key (or instruction) Display/Output
1. Select the net-total application see “Preparation”
in the Setup menu
2. Prepare a container for the Place the empty container
components on the balance
3. Tare the balance t
4. Add first component Place the first component
in the container
5. Store component value 1. comp soft key v
6. Add next component Place next component
in the container
7. Store component value 2. comp soft key v
8. If desired, add further Repeat steps 6 and 7
components as needed
9. Display total weight w
Comp1 + 952.48 g
Comp1 + 952.48 g
Comp2 + 2837.12 g