Service Menu
Purpose
The service menu enables access to
additional menu items in the setup
menu, which are not displayed when
the service mode is not active.
The most important calibration and
adjustment work for the indicator and
for the connected weighing platform
can be carried out in the service menu.
When the Service mode is active, an “S”
is shown in the top right-hand corner
of the display. To deactivate the Service
mode, restart the indicator (turn the
indicator off and back on again).
The following additional functions are
available in the service mode:
The following are the menu items
displayed behind the menu items date
(“DATE”) and code (“CODE”):
– Service date “S DATE”
(Entry of the next service date)
– Memory number “MEM NO”
(Entry of a transaction code for an
external Alibi memory)
– Serial number of the indicator
”SER NO”
– Model description “model”
(Entry of the device serial number)
12
To Next Page
Loading...
Need help?
General
