Sartorius MIS2 - Page 56

p
,
p
,
p
9. Enter the first character using
the p and k keys
(in this example, the first
character is “
C")
)
10. Save the character
11. Proceed as described above to
enter subsequent characters.
After entering the last
character, press ) to save
the code.
(
12. Exit the active submenu
to configure other menu
settings, or
)
13. Press and hold ) to exit
the operating menu
Example with Midrics 2:
Enter ID code values.
Enter “123" as the value for ID code 2.
d
1. Activate ID input.
123
2. Enter the desired value for
ID code 2
(in this example:
123).
O
3. Press O to conclude input.
4. Place sample on the platform
p
5. Print the weight value
ID2 123 ID code 2
24.02.2006 10:09
-------------------
Ser.no 12345678
G# + 1083 g
T + 0000 g
N + 1083 g
6. Deleting ID codes:
ID codes are deleted one
at a time; for example,
when the weighing operations
have been completed
d
,
c
Delete ID code 1
d
,
d
,
c
Delete ID code 2
Example with Midrics 2:
Enter a value for ID code 1 directly.
123
1. Enter the desired value
for ID code 1
(in this example:
123).
d
2. Store the value as ID 1
3. Place sample on the platform
p
4. Print the weight value
ID1 123 ID 1
24.02.2006 10:09
-------------------
Ser.no 12345678
G# + 1083 g
T + 0000 g
N + 1083 g
5. Delete the ID code:
see Item 6 in the previous
example
56
56