Sartorius mLINE - Table of Contents

1
Contents
1. Intended use .....................................................................................................2
2. Product description ........................................................................................2
3. Sartorius pipette tips ..................................................................................... 4
4. Unpacking .......................................................................................................... 4
5. Personal identification ..................................................................................5
6. Pipette holder and carousel stand ............................................................ 5
6.1. Installing the pipette holder ........................................................5
6.2. Carousel stand .................................................................................. 5
7. Calibration tool (also tube and ID window opener) ........................... 5
8. Operating the pipette ....................................................................................6
8.1. Setting the volume ..........................................................................6
8.2. Sealing and ejecting tips ............................................................... 6
8.3. Protective tip cone filters ............................................................. 6
9. Pipetting techniques...................................................................................... 7
9.1. Forward pipetting ............................................................................ 7
9.2. Reverse pipetting .............................................................................7
9.3. Repetitive reverse technique .......................................................8
10. Recommendations for good pipetting ....................................................8
11. Maintenance ..................................................................................................... 9
11.1. Daily cleaning of the outer surface of the pipette ............. 9
11.2. Cleaning the lower part of the pipette .................................... 9
11.3. Sterilization of the pipette .........................................................11
12. Testing the performance and recalibration ........................................11
12.1. Testing the performance ............................................................. 12
12.2. Recalibration....................................................................................13
13. Troubleshooting ............................................................................................. 15
14. Warranty information .................................................................................16
15. Performance specifications ......................................................................16