2
1. Intended use
mLINE pipette is intended to be used in liquid
handling applications for dispensing liquids in
volume range of 0,1 µl to 10 ml. It is recommended
to use Optifit Tips or SafetySpace™ Filter Tips to
ensure the best compatibility and performance
with Sartorius pipettes.
This liquid handling device is designed and
manufactured to be used as general purpose
laboratory equipment. Before operating it is
recommended to read the user manual, which
contains useful information e.g. for good
pipetting practice.
2. Product description
Your new mLINE is an autoclavable air
displacement pipette. The attractive and
ergonomical design of the mLINE pipette together
with its very low pipetting forces reduce the risk
of repetitive strain injuries (RSI). The pipette is
designed for both right- and left-handed use.
NOTE: It is known that prolonged pipetting can
cause RSI. The manufacturer is not responsible for
RSI or any related diseases caused by prolonged
pipetting.
Cat. No. Colour
Code
Channels Volume
Range/µl
Increment
/µl
Tip
/µl
Safe-Cone Filters
50 pcs/bag
Standard Plus
725010 Grey 1 0.1-3 0.002 10 - -
725020 Grey 1 0.5-10 0.01 10 - -
725030 Yellow 1 2-20 0.02 200 721014 -
725050 Yellow 1 10-100 0.1 200, 350 721008 721018
725060 Yellow 1 20-200 0.2 200, 350 721007 721017
725070 Blue 1 100-1000 1 1000 721006 721016
725080 Green 1 500-5000 10 5000 721005 721015
725090 Red 1 1-10 ml 20 10 ml 721005 721015
725120 Grey 8 0.5-10 0.01 10 - -
725130 Yellow 8 5-100 0.1 200, 350 721008 721018
725140 Orange 8 30-300 0.2 350 721007 721017
725220 Grey 12 0.5-10 0.01 10 - -
725230 Yellow 12 5 - 100 0.1 200, 350 721008 721018
725240 Orange 12 30 - 300 0.2 350 721007 721017
mLINE single- and multichannel pipettes
To Next Page
Loading...