Getting Started
Analytical and precision balances:
1. Plug the DC supply cable of the AC adapter into the power socket of the
balance and tighten the threaded fitting�
Balances with a readability of ≤ 0�01 mg
1. Plug the DC supply cable of the AC adapter into the power socket of the
electronics module and tighten the threaded fitting�
2. Plug the other end of the power cord into the AC adapter�
3. Insert the AC adapter power plug into the wall outlet�
y The balance is now ready to use�
Safety Precautions
The output line of the adapter has a terminal (GND) connected to the metal
housing of the balance� The data port is also galvanically linked to the balance
housing (GND)�
18 Cubis MSE Operating Instructions
To Next Page
Loading...