Sartorius Vivaflow 50 - Operation of Two Modules

12 |
Operating two Vivaflow 50R or
two Vivaflow 200 Modules
Assembly and rinsing two modules
1. Set up the Vivaflow 50R system as illus-
trated in Diagram 6 and the Vivaflow 200
System as illustrated in Diagram 7 system as
illustrated above.
!
Warning: Ensure Luer connections are
secure before operation.
2. Vivaflow 50R:
Use two T-connectors (VFA030) to
connect to the inlets of both Vivaflow
50R modules.
Vivaflow 200:
Use the Y-connector, (VFA005)
to connect to the inlets of both
Vivaflow 200 modules.
The size 15 tubing connected to the
Y-connector is the inlet tubing for the
pump. Use a size 15 pump head.
Diagram 6: Setting up two Vivaflow 50R units