36
Cleaning the Data Printer
! When cleaning the data printer, make sure that no liquid
enters its housing
! Please do not use any aggressive cleaning agents
(solvents or similar agents)
§ Disconnect the power supply by unplugging the interface
cable (connecting the weighing instrument) from the rear
panel of the printer
$ If you are using an external power supply, unplug the AC
adapter from the electrical outlet (mains supply)
§ Use only a cloth moistened with a mild detergent (soap) to
wipe down the printer housing
§ After cleaning, wipe down the printer with a soft, dry piece
of cloth
To Next Page
Loading...
