Sartorius YDP 03-0CE - Printing a Hard Copy of the Settings

30
Printing a Hard Copy of the Settings
§ To select the “Interface Settings for the Data Printer”
menu,
– hold down the key when you start the printer;
– hold down the key for more than 5 seconds during
printer operation
> You will obtain the readout shown on the left
§ To print the settings, press the key
> You will obtain the readout shown on the left
(Example: these are the factory settings)
§ To exit the “Interface Settings for the Data Printer” menu,
press the key
123456789012345678901234
Interface Settings
Program Vers. 1.xx C
------------------------
Baud rate 1200 bd
Parity odd
Handshake DTR/CTS
P1:Send CR/LF ON
P2:Print format right
P3:Decimal-Char point
P4:Num.function ON
P5:Inverse from 0FF
P6:Print mode Standard
P7:Date/Time ON
P8:Print TEXT1 OFF
P9:Print TEXT2 OFF
C1:Time format 24h
C2:Display Time