43
Installation
The thermostat can be mounted on the wall with the help of a battery
cover (holes with standard distance of 60 mm distance - see the picture
on the right, surrounded by blue). The option is also installation on a
classic electric concealed electric underwall box 60mm.
However, if you want, you can place the thermostat on the
included simple stand.
The installation of the receiver is described at the end of this manual.
Thermostat installation and placing tip
In any case of the thermostat installation (on wall or portable), be careful not put it near
sources of hot or cold air, direct sunlight, draught or other types of temperature influences.
Also, make sure that the thermostat is placed at least 30cm away from metal parts and 1
meter from other electrical devices. If you mount the thermostat on a wall, the most optimum height
for mounting is 150cm and at least 20cm away from the door, windows, cupboards and similar objects.
Also, install the thermostat on the inside wall of the house.
If you don’t follow these recommendations, it can happen that the thermostat will not function correctly.
Because of signal interference (electrical sources, metal parts, ...) or due to incorrect reading of the
temperature (drafts, sun, cold or the hot spot, ...).
To Next Page
Loading...
Need help?
General
