47
Temporary temperature change (hold)
In case you are using heating program schedule and you don’t like the currently programmed
temperatures; you can change the currently set temperature until the next heating program change.
You can easily activate this function by short pressing button + or -. When this function is enabled, the
display will show icons – which means heating schedule is on and temperature hold is on. The
function turns off automatically when the next heating program is scheduled or by simply double
pressing the button.
Constant, permanent temperature change (hold)
In case you are using heating program schedule and you don’t like the currently programmed
temperatures; you can turn off the currently set temperature at your likings. This also comes handy
when you’re away for a longer time (e.g. holiday) and you want to lower the temperature as much as
possible for better energy savings. You can easily activate the function by short pressing on the button
. If you had heating schedule turned on, display will change from to show only . Now you can
set the desired temperature by pressing buttons + and -. If you’re not using the heating schedule, this
function is turned on by default and the thermostat works as a daily thermostat. If you want to exit this
function, simply short press the button.
Setting the time and day
When the thermostat is turned on hold the button for 3 sec to enter setting of the current time and
date. When in settings, you select the setting you’re changing by short pressing the button,
changing the values by pressing + or -. Changes are saved automatically if no button is pressed for a
few seconds or by pressing the button.
Time and date description: Y – Year | t – Minutes, then Hour | d – Day | rn – Month
To Next Page
Loading...
Need help?
General
