SATAM ZC 17-24 User Manual

SATAM Siège Social : Paris Nord II – Bât. Le Gauguin – 47, allée des Impressionnistes
Usine de Falaise – Avenue de Verdun – B.P. 129 – 14700 FALAISE – France B.P. 85012 – Villepinte – 95931 Roissy C.D.G. Cedex - France
Tél. : +33 (0)2 31 41 41 41 Tél. : +33 (0)1 48 63 02 11
Fax : +33 (0)2 31 40 75 61 Fax : +33 (0)1 49 38 41 01
SIRET 495 233 124 000 17 SA au capital de 6 037 000 € – RCS Bobigny B 495 233 124
CODE APE 2813 Z SIRET 495 233 124 000 17 – Code APE 2813 Z – N° TVA : FR 48 495 233 124
MEASURING CHAMBERS – ZC 17-
24
and ZC 17-48 METERS
--
Description – Installation – Operation – Servicing
U508113-e– Révision 4 – 29 March 2012
This document consists of 16 pages, (including the flyleaf)
This document is the property of SATAM
And can’t be transmitted to someone also with out prior authorisation
SATAM may modify this document without prior notice
In conformity with the European directive 94/9/CE-ATEX

SATAM ZC 17-24 Specifications

General

Brand	SATAM
Model	ZC 17-24
Category	Measuring Instruments
Language	English

Summary

Operating Principle Explained

Key Meter Components

Detailed Description of Meter

Blade-Type Measuring Chamber

Details the construction and components of the measuring chamber.

AB 35 Calibrating Mechanism

Three-Way Valve Functionality

Meter Installation Guidelines

Meter Operation Procedures

Preset Quantity Setting

3-Way Valve Operation Steps

Metrological Inspection and Calibration

Mechanical Head Adjustment Procedure

Details the test and adjustment procedure for the mechanical meter head.

AB 35 Adjustment Operation

Provides step-by-step instructions for adjusting the AB 35 mechanism.

Electronic Calculator Adjustment

References calibration instructions for electronic calculator models.

Periodic Servicing Schedule

Yearly Inspection Procedures

Meter Head and Important Remarks

Critical Cleaning Warning

Strongly advises against using high-pressure water jets to clean the unit.