ST-5810 Operation Manual
Copyright © 2019-2022 SatLink Elextronics 34
5.4 ROTOR CONTROL
DiSEqC (Digital Satellite Equipment Control) commands can be issued to control the antenna rotor to switch between more
popular satellites. Universal Satellites Automatic Location System (USALS) protocol can also be selected to issue commands
to control the rotor. DiSEqC 1.3 refers to a receiver which uses USALS in conjunction with the DiSEqC 1.2 protocol.
Signal Strength Indicator (SSI)
Signal Quality Indicator (SQI)
Drop down for Satellite selection
Drop down for transponder
selection
Movement command
Movement orientation
Command protocol
Apply/Execute Move step
To Next Page
Loading...
