Need help?Do you have a question about the Satlink WS-6922 and is the answer not in the manual?
General| Frequency Range | 950-2150 MHz |
|---|---|
| Input Level | -65 dBm to -25 dBm |
| Input Impedance | 75 Ω |
| Sound and Light Alarm | Yes |
| DiSEqC | 1.0, 1.1, 1.2 |
| Input Connector | F-Type |
| Display | LCD |
| Symbol Rate | 2-45 Msps |
| Power Supply | DC 12V |
| Weight | 0.4 kg |
| Measurement Type | Signal Strength, Quality; BER; S/N; PWR |
| LNB Power Supply | 13/18V, max 400mA |
| Battery | Li-Ion |
Details the functions of each button on the device's keypad.
Instructions on how to turn the satellite finder meter on and off.
Information on the device's power adapter and internal battery.
Guide to searching for satellite signals and aligning the antenna.
How to select a satellite and its current frequency.
Configuration options for LNB type, motor, power, style, and switch.
How to input the frequency value for the down frequency.
Options for configuring system settings like language, screen, and reset.
Guide for calculating satellite alignment parameters like Azimuth and Elevation.
Initiating the calculation of Azimuth, Elevation, and Polarization.
Important warnings and guidelines for safe handling and use of the device's battery.
To Next Page
