What to do if Satlink WS-6926 have a bad picture or blocking error?
- BBrian OrtizAug 3, 2025
If you're experiencing a bad picture or blocking error with your Satlink Camera Accessories, it could be due to several reasons: * No signal or weak signal: Check the cable connections, LNB, and any other equipment between the LNB and the meter. Also, adjust the dish. * The satellite dish is not pointing at the satellite: Adjust the dish. * Signal is too strong: Connect a signal attenuator to the LNB input. * Satellite dish is too small: Consider changing to a larger dish. * LNB noise factor too high: Change to an LNB with a lower noise factor. * The LNB is faulty: Replace the LNB.