EasyManua.ls Logo

Satlink WS-6926 - 1.4 Installation of Meter; 2. OUTLINE; 3. THE MENU OSD INSTRUCTION

Satlink WS-6926
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE PROFESSIONAL EQUIPMENT------------------|USERS MANUAL| THE PROFESSIONAL EQUIPMENT------------------|USERS MANUAL|
Note1:When the adapter insert dc slot,Charging indicator
scintillation three times, then the indicator is often bright,
when the batteries charged sufficient, the charge indicator is
going out.
Note2:Keeping the key over 1 s, it will be the (2) function,
otherwise is the (1)function.
Note3:The Key only in menu'3.1.0.1 Quick Search'is effective.
2. OUTLINE
3.5 Inch High Definition TFT LCD Screen
H.264 Hardware decoding
Digital meter for signal strength and quality
Supports scan of Auto,Manual.
Sound and Light Alarm for Locking Signal
Speaker Integrated
Support both AV out and AV in
Ant short protect
PAL-NTSC auto-conversion
8.4V/3000mAh Lion Battery Included
Software upgrade via USB port
Easy to carry
Fully DVB-S/DVB-S2
3. THE MENU OSD INSTRUCTION
If you have installed and connected the cables of the meter,
pressing MENU key to display the Main Menu.
Satellite Finding
System
Multimedia
TP Manage
05-Digital Satellite Meter Digital Satellite Meter-06
1.4 INSTALLATION OFMETER
Note4:When the battery is on power failure, a voice alarm, pl-
ease a timely charge, do not continue to be used to avoid the
internal battery runs out and shorten the usage time.
Press the keys of to move the cursor up or down in
the menu interface, then use OK key to confirm a selection.

Related product manuals