Satloc FALCON - Page 7

Section One
4
www.Satloc.com Falcon User Manual, Rev A
Both Falcon models are compatible with Satloc Cloud. Satloc Cloud is a Satloc soware product that can be used in
conjunction with Falcon and Falcon Pro to perform more advanced tasks. Satloc Cloud is a real-time web-based asset
tracking tool that enables companies to track the position and position-related data of aircra and other assets, such as
spotter vehicles and loader trucks.
e Satloc Cloud symbol will appear in this user manual when there is a function that requires integration with
the Falcon Models and Satloc Cloud.
Visit www.Satloc.com for more information about Satloc Cloud, or contact your local Satloc dealer.
Satloc Cloud
1.2 A NEW WAY OF DOING ‘JOBS’
In the Falcon system, all your data is contained in a Job. is means that all that data is contained in the Job no matter
what day you applied, how many patterns you used during an application, or how many times or even days you returned
to apply.
Jobs can be created in real-time. Additionally, Jobs can be made from a polygon(s) or prescription maps and then loaded
into the Falcon through USB or the Cloud. ey all behave the same.
A Job and all the related paint and swathing data are opened on the Falcon by 1) loading the Job (through the menu or a
Hotkey) or 2) by returning to a Mark (created while that Job was previously open).
If the user creates a new job on the Falcon, a default job name is suggested with the Falcon’s serial number, date of
application, and daily job counter as the job name. e user could instead name the Job something meaningful: “Farmer
Brown Field.” e job name would be followed by the date and the log counter.
Jobs Are Everything
The Falcon contains all swathing data (pattern, swath number,
A-B Line, etc.) within the Job even when a Mark is not set. So, any
swathing can be restored as active to continue.
All Job data is exported as one log le from the Falcon. Within
the Satloc Cloud, all Job data has a common log name for a
group export. Any export can then be loaded in MapStar or other
programs.
All paint and swathing data is loaded each time a Job is loaded.
Pilots do not need to remember all the logs that make a whole
application together.
CONTAINED IN JOBS
BENEFITS OF ALL DATA
01
02
03
04