To Next Page
X
xreeseSep 5, 2025
How to fix incorrect label sensor selection on my SATO CG408?
- TtwattsSep 6, 2025
If you selected an incorrect label sensor on your SATO Label Maker, set the sensor correctly by printer setting tool.
How to fix incorrect label sensor selection on my SATO CG408?
If you selected an incorrect label sensor on your SATO Label Maker, set the sensor correctly by printer setting tool.
How to resolve incorrect label sensor selection on my SATO CG408?
If you have incorrect label sensor selection on your SATO Label Maker, set the sensor correctly by printer setting tool.
What to do if the cover of my SATO Label Maker is open?
If the SATO Label Maker cover is open, ensure that it is closed properly.
Why my SATO CG408 Label Maker does not turn on?
If the SATO Label Maker is not turning on, it may be due to the power connector or AC adapter not being properly connected.
General| Resolution | 203 dpi |
|---|---|
| Max Print Width | 104 mm |
| Print Method | Thermal Transfer |
| Max Print Speed | 4 inches/sec |
| Media Roll Diameter | 127 mm (5 inches) |
| Memory | 4 MB Flash |
| Interface | USB, Serial, Ethernet |
| Media Sensor | Reflective and Transmissive |
| Media Thickness | 0.06 mm - 0.19 mm |
| Ribbon Length | 100 m (328 ft) |
| Label Thickness Range | 0.06 mm - 0.19 mm |
