SATO CL6NX - Page 5

CL6NX KITTING MANUAL
<Preparation tool and Caution>
*Phillips screwdriver +No.2
*Nipper
Please turn OFF the power before assembling the dispenser.
<Procedure (Dismantle)>
1. Open the open-cover, and Head-open
2. Remove (1) screw, and take-out (2) and (3) .
3. Remove (4) screw, and take-out (5) Cover-LH.
(3)
FRONT COVER
BOTTOM (LH)
(2)
FRONT COVER
BOTTOM
(1)
PAN SCREW SW+WL
(MD3401428): 2pcs
Reuse
Disuse
Slide
Disuse
(4)
PAN. SCREW SW+WL
(MD4401022)
(5)
COVER LH
Reuse
Slide
& Lift up
Reuse
Notes> When remove the cover LH,
Please be careful that the cover does not touch the PCB
↑ Deformed Capacitor by contact with the cover
Page. 3
DS KIT +RW MODEL
DS KIT MODEL