SATO CL6NX - Page 7

CL6NX KITTING MANUAL
<Procedure (Assembly)>
8. Attach (10), fix by (11) screw.
9. Attach (12), fix the motor cable.
10. Re-attach (13), fix by (14) screw.
Page. 5
Slide
(13)
LABEL HOLDER
GUIDE -RH
(14)
BIND P-TIGHT SCREW
(MH2300822): 3pcs
Reuse (modified parts)
Reuse
Torque : 3.5～4.5 Kg･cm
(10)
REWIND MOTOR
SUB
KIT items
(11)
PAN SCREW SW+WL
(MD4400822): 4pcs
KIT items
Torque : 14.0～16.0 Kg･cm
(12)
TIE WRAP
(JG100011A):1pcs
KIT items
Motor cable is in the
shaded area , do not
overlap
Screwing 4 places
Motor cable , fixed with
TIE WRAP.
Motor cable is in the
shaded area , do not
overlap
Motor cable
Tie wrap
Motor cable
Insert the motor cable
Into the hole.
DS KIT +RW MODEL only