‒ LM400e Series specifications
‒ Model: LM408e / LM412e
‒‒Print method: Thermal transfer / Direct thermal
‒‒Print resolution:‒‒‒ 203/305dpi 8 dots mm/12 dots mm
‒‒Media size: Max. 128mm Width (including backing liner 131mm)
‒‒Printable area: Max. 104mm width / Max. pitch 178mm
‒‒Max. print speed: 6 inch/s (approximately 150mm/sec)
‒‒Dimensions: W271 x D430 x H321mm (Standard)
‒‒‒‒‒‒‒‒‒‒‒ 13kg (Standard)
‒‒Roll media: Max. external diameter 8 inch (150m/roll)
Face in, 3 inch roll
‒‒Fan-fold: Max. folded height 100mm, Feeding the fan-fold externally
‒‒Sensor type: Toggles sensor between Reflective sensor/Transmissive sensor,
Carbon ribbon: 450m/roll
‒‒‒‒‒‒‒‒‒‒‒ Note) Carbon ribbon width needs to be wider than media width.‒
‒‒Power: 110-220VAC±10%‒ 50/60Hz±1%
‒‒Environment: Operating 5 to 40 degrees C‒‒
‒‒‒‒‒‒‒‒‒‒‒ Storage -20 to 40 degrees C
‒‒‒‒‒‒‒‒‒‒‒ Humidity 30 to 85% Non-condensing
‒‒‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
‒
To Next Page
Loading...
