Need help?Do you have a question about the SATO LP 100R and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | 4 ips (101.6 mm/s) |
| Max. Print Width | 104 mm (4.09 inches) |
| Media Width | 25.4 mm - 114.3 mm (1 inch - 4.5 inches) |
| Media Thickness | 0.06 mm - 0.18 mm (0.0024 in - 0.007 in) |
| Supply Roll Diameter | 127 mm (5 inches) max. |
| Ribbon Length | 300 m (984 feet) |
| Supported Barcode Types | Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Codabar, POSTNET, PDF417, Data Matrix, QR Code, MaxiCode |
| Power Requirements | 100-240 VAC, 50/60 Hz, 1.5A |
| Operating Temperature | 5°C to 40°C (41°F to 104°F) |
Instructions for loading forms and managing paper paths.
Tools and procedures for daily cleaning and maintenance.
Detailed steps for replacing toner, waste toner, OPC, and cleaning blade.
Guide to identifying and clearing paper jams in different printer areas.
Steps to resolve issues like blank prints, light/dark images, and artifacts.
Lists error codes and their suggested operator actions.
To Next Page
