SATO LP 100R - Store Configuration

LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-63 April, 2014
of 128 pages
Store Configuration
The Store setting is used to either store a new configuration on the printer’s hard
drive or store updates to an existing configuration already stored on the printer’s
hard drive.
Note: The Store setting can not be executed when a print job is in progress.
1. Press the Up or Down triangle on the Configuration menu to move the
selection bar to the Store function.
2. Press Enter, which causes the following Store Configuration screen to display:
Figure 6-50. Store Configuration screen.
Current
Config