LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-4 April, 2014
of 24 pages
Fuser Unit Cleaning
1. Open the left-side door.
2. Remove the fuser filter.
3. Loosen the 2 fixing screws and open the fusing unit by holding the handle.
4. Use a cloth moistened with water to wipe off stains from the lens glass. If
toner deposition has built up, use a neutral detergent.
5. Close the fusing unit and tighten the 2 fixing screws.
6. Replace the fuser filter.
7. Close the left-side door.
Fixing screws
To Next Page
Loading...
