LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-22 April, 2014
of 32 pages
Print Configurations
The Print Configurations function produces a printout of all of the configurations
stored on the controller's hard drive.
Note: The procedures that follow assume that the default 11" (height) by 14.5"
(width) form size has been loaded into the printer.
1. Select Print Configurations from the Operator Express menu.
2. When prompted to do so, press Enter.
3. After all of the configurations print, press Feed to clear the last printed page
from the printer.
Figure 3-15 shows a sample configuration page.
To Next Page
Loading...
