SATO LP 100R - Delete Archive

LP 100R Laser Printer Operator's Guide Appendix B: Managing Files
Rev: 1 Page B-25 April, 2014
of 60 pages
Delete Archive
1. Select Delete Archive from the Manage Archive Fonts menu and press Enter.
2. The following screen displays:
Figure B-22. Delete Archive fonts.
3. Using the Up and Down buttons, select each font to be deleted, pressing
Select after each font selected.
Note: When Select is pressed, an asterisk (*) displays to the left of the font
selected for deletion.
4. If any font selected for deletion is not to be deleted:
a. Reselect the font.
b. Press Select.
c. The asterisk (*) is erased, and the font is not deleted.
5. When all fonts to be deleted have been selected, press Enter.
6. The system returns to the Manage Archive Fonts menu.