SATO LP 100R - Kodescriptplus Status Messages

LP 100R Laser Printer Operator's Guide Chapter 5: Problem Solving
Rev: 1 Page 5-25 April, 2014
of 30 pages
KodescriptPlus Status Messages
Code Description Explanation
01 Start KodescriptPlus The METO-Logic Controller is being set to use
KodescriptPlus emulation.
02 Start Parsing Format The METO-Logic Controller is interpreting the
KodescriptPlus page format.
03 Sorting Field
Numbers
The METO-Logic Controller is sorting the field
numbers specified by the Variable Field Data
command (^[ffcccc).
04 Fetch Repeat Count The METO-Logic Controller is determining the
number of times data is to be printed.
05 Start Parsing Data The METO-Logic Controller is formatting the
data for printing.
06 Start Printing Process The printer is beginning to print the data
formatted by the METO-Logic Controller.
07 Freeing Memory The METO-Logic Controller is releasing areas of
memory that it is no longer using.
08 Processing Complete The processing designated by the
KodescriptPlus program is complete.