LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-28 April, 2014
of 32 pages
Printer Cleaned
Selecting the Printer Cleaned function from the Operator Express menu causes
the following screen to display:
Figure 3-18. Printer Cleaned.
1. Press the Up or Down triangle to select the desired response.
2. Press Enter.
3. If No is selected, the system returns to the Operator Express menu.
4. If Yes is selected, the following message displays:
5. When the counter has been reset, the system returns to the Operator Express
menu.
Counter Reset
Please Wait
To Next Page
Loading...
