LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-16 April, 2014
of 32 pages
Exit Menu System Options
When a key is pressed that causes the printer to exit the menu system, the
following screen displays:
Figure 3-9. Exit the menu system.
Exit Menu System Buttons
Button Function
Menu Press Menu to reinitialize the menu system and return the
system to the main menu.
Clear Press Clear to clear the input buffer.
Maint. Press Maint. to reinitialize the menu system. The maintenance
menu will display.
The following functions are reserved for use by service personnel:
Skip Press Skip to advance the document 1/6".
Test Press Test to reinitialize the menu system and shortcut access
to the Test Prints menu.
Status Press Status to reinitialize the menu system and shortcut
access to the Print Status procedures.
Recall Press Recall to reinitialize the menu system and shortcut
access to the Recall configuration.
See Recall Configurations starting on page 3-19.
Align Press Align to reinitialize the menu system and shortcut access
to the Print Alignment menu, which allows adjustments to the
horizontal and/or vertical fine print positions.
See Modify Horizontal Fine Adjustment on page 3-20.
To Next Page
Loading...
