SATO LP 100R - Ethernet Setup

LP 100R Laser Printer Operator's Guide Appendix E: The Menu System
Rev: 1 Page E-16 April, 2014
of 20 pages
Ethernet Setup
Enable Ethernet
Host Protocol
Static IP Settings
DHCP IP Settings
Activate New Settings
Job Trace
Windows Network Printing
Raw Printing
Socket Buffer
Host
Protocol
Static
[DHCP]
Boot P
Static IP
Settings
IP Address
Subnet Mask
Gateway
Ethernet Setup
Activating Current
Ethernet Settings
DHCP IP
Settings
IP Address
192.168.0.84
Job Trace
[Disabled]
Enabled
Windows
Network
Printing
[Disabled]
Enabled
Enable
Ethernet
[Disabled]
Enabled
TCP/IP
Setting
Port
Timeout
Socket
Buffer
Units: None
Min: 0
Max: 16384
Step: 1