LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-26 April, 2014
of 32 pages
Print Status Page
The Status Page summarizes the operating parameters for the LP 100R printer.
Note: The procedures that follow assume that the default 11" (height) by 14.5"
(width) form size has been loaded into the printer.
1. Select Status Page from the Operator Express menu.
2. When the Status Page has completed, press Feed to clear the last printed
page from the printer.
Figure 3-17 shows a sample Status Page.
To Next Page
Loading...
