LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-18 April, 2014
of 24 pages
OPC Drum/OPC Cartridge Replacement
1. Open the front door.
2. Pull out the EP holder slowly as far as it will come.
3. Remove the main charger unit by rotating and swinging up the developer unit
side approximately 30 degrees (position A).
4. Remove the OPC cartridge by holding the handle and the plastic part
(position B).
Note: Place the OPC cartridge on a level place, using a cleaning pad to protect
the level surface and the OPC drum.
OPC cartridge
OPC drum
A
B
To Next Page
Loading...
