SATO LP 100R - Daily Maintenance; AIDC Sensor Cleaning; Tractor Unit Cleaning; Fusing Unit Cleaning

LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-10 April, 2014
of 24 pages
Daily Maintenance
To use the printer safely and in optimum condition at all times, clean the following
parts daily.
AIDC Sensor Cleaning
Use a dry cotton swab or other suitable material to clean the AIDC sensor.
Tractor Unit Cleaning
 Use a dry cloth to clean the center guide side of the tractor unit.
 Use a brush to clean the paper dust around the tractor unit.
Fusing Unit Cleaning
Use a cloth moistened with water to wipe off stains. If toner deposition has built
up, use a neutral detergent.
AIDC sensor
Center guide