LP 100R Laser Printer Operator's Guide Chapter 6: Supervisory Functions
Rev: 1 Page 6-114 April, 2014
of 128 pages
EAS (Electronic Article Surveillance)
When enabled, the Electronic Article Surveillance (EAS) setting changes the energy
used to transfer the printed image to documents that contain metal.
Note: The EAS setting can not be changed when a print job is in progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the EAS function.
2. Press Enter, which causes the following EAS screen to display:
Figure 6-82. EAS screen.
Note:
• Brackets ( [ ] ) around a specific EAS mode indicate that it is the Default
EAS Configuration.
• An arrow () pointing to a specific EAS mode indicates that it is the EAS
mode assigned to the current configuration.
3. Press the Up or Down triangle to move the selection bar to the EAS mode
desired.
4. Press Enter to save the EAS mode selected.
To Next Page
Loading...
