SATO LP 100R - USB to Archive

LP 100R Laser Printer Operator's Guide Appendix B: Managing Files
Rev: 1 Page B-20 April, 2014
of 60 pages
USB To Archive
1. Select USB To Archive from the Manage Archive Fonts menu and press
Enter.
2. The following screen displays:
Figure B-16. Accept/Abort USB To Archive selected.
3. If the USB To Archive function is to be aborted, press Back, which causes the
system to return to the Manage Archive Fonts menu without executing the
USB To Archive function.
4. If the USB To Archive function is not to be aborted:
a. Open the front door on the printer.
b. Insert the flash drive, whichever is to be used, into the appropriate USB
port on the front of the controller.
c. Close the front door on the printer.
5. Press Enter.