LP 100R Laser Printer Operator's Guide Chapter 4: Printer Maintenance
Rev: 1 Page 4-2 April, 2014
of 24 pages
Maintenance
Because the printer is used almost continuously, paper dust and toner may build
up on the surfaces inside the printer. To keep the printer in the optimum condition
at all times, the interior surfaces of the printer must periodically be cleaned.
Note: Make sure to turn power to the printer off when cleaning or servicing it.
Cleaning Tools
Use the following tools when performing the cleaning procedure in this guide.
Tool Use
Cleaning brush To remove paper dust and toner particles
Cleaning pad To remove paper dust and toner particles
Cleaning brush Cleaning pad
To Next Page
Loading...
