LP 100R Laser Printer Operator's Guide Chapter 3: Printer Operation
Rev: 1 Page 3-11 April, 2014
of 32 pages
Figure 3-7. System start-up screen.
System Start-up Screen Definitions
Item Definition
A. Mode of operation The LP 100R printer is operated under 4 different
modes:
Online Idle – When the printer is in the
Online Idle mode, it is ready to accept print
data from a host computer.
Note: When power to the printer is turned
on, the printer activates in the Online Idle
mode.
Online Print – The printer is either
processing or printing the data it has
received.
Offline Idle – The printer must be in the
Offline Idle mode to load paper, execute
some maintenance functions, or to recall a
stored printer configuration.
Offline Print – To temporarily suspend the
Online Print mode and switch the printer to
the Offline Print mode, press the OFFLINE
switch. Press the ONLINE switch to return
the printer to the Online Print mode.
B. Configuration The system start-up screen displays the last
active User Configuration No., which can range
from 001-999.
If the User Configuration No. has not been
stored, or if it is stored but not used, the default
Configuration No., 000, displays.
(continued on next page)
To Next Page
Loading...
