SATO LP 100R - Controller Errors; Communication Errors

LP 100R Laser Printer Operator's Guide Chapter 5: Problem Solving
Rev: 1 Page 5-22 April, 2014
of 30 pages
Controller Errors
Message Explanation
Out of Memory The printer has requested more memory than the operating
system can provide at the present time.
FIFO Underrun Fatal error. Call service.
GPF General Protection Fault. Fatal error. Write down the
number at the bottom of the display screen (example: EIP=
000E4932) and notify service.
Communication Errors
Message Explanation Action
Overrun
Error
The receive buffer of the printer is
full and the printer could not stop
the host from sending more print
data.
Reset the host and printer.
Unknown
Error
Indicates that an unidentifiable
communication error has occurred.
Reset the host and printer.